Onsrud Series 70-100 - Soft Plastic - Slow Feed

Carbide Tipped Trim Blade and Arbor for Soft Plastic, Slow Feed
Usage: Soft Plastics
(SP) = Soft Plastic
Onsrud Series 70-100 - Soft Plastic - Fast Feed

Carbide Tipped Trim Blade and Arbor for Soft Plastic, Fast Feed
Usage: Soft Plastics
(SP) = Soft Plastic
Onsrud Series 70-100 - Hard Plastic - Fast Feed

Carbide Tipped Trim Blade and Arbor for Hard Plastic, Fast Feed
Usage: Hard Plastics
(HP) = Hard Plastics
Onsrud Series 70-100 - Arbor

Arbor for Carbide Tipped Trim Saws
Usage: Hard and Soft Plastics
(HP) = Hard Plastics
(SP) = Soft Plastics
Onsrud Series 70-200

Solid Carbide Trim Blade Flush Mount
Usage: Hard and Soft Plastics
(HP) = Hard Plastics
(SP) = Soft Plastics
Onsrud Series 70-300 - Soft Plastic

Carbide Tipped Trim Blade Flush Mount for Soft Plastics
Usage: Soft Plastics
(SP) = Soft Plastics
Onsrud Series 70-300 - Hard Plastic

Carbide Tipped Trim Blade Flush Mount for Hard Plastics
Usage: Hard Plastics
(HP) = Hard Plastics
Onsrud Series 70-500 - Fractional Drills

2 Flute - HSS Plastic Drill; Fractional Drills
Usage: Hard and Soft Plastics
(HP) = Hard Plastics
(SP) = Soft Plastics
Onsrud Series 70-500 - Metric Drills

2 Flute - HSS Plastic Drill; Metric Drills
Usage: Hard and Soft Plastics
(HP) = Hard Plastics
(SP) = Soft Plastics
Onsrud Series 72-000 - Brad Point

2 Flute - Solid Carbide Boring Bits, Brad Point
Usage: Soft Wood, Hard Wood, Wood Composite, Laminated Wood
(HW) = Hard Wood
(SW) = Soft Wood
(CW) = Composite Wood
(LW) = Laminated Wood
Onsrud Series 72-000 - Through Hole

2 Flute - Solid Carbide Boring Bits, Through Hole
Usage: Soft Wood, Hard Wood, Wood Composite, Laminated Wood
(HW) = Hard Wood
(SW) = Soft Wood
(CW) = Composite Wood
(LW) = Laminated Wood
Onsrud Series 72-000 - Hinge Bit

2 Flute - Carbide Tipped Boring Bits, Hinge Bit
Usage: Soft Wood, Hard Wood, Wood Composite, Laminated Wood
(HW) = Hard Wood
(SW) = Soft Wood
(CW) = Composite Wood
(LW) = Laminated Wood
Onsrud Series 77-100

2 Flute and 3 Flute - Solid Carbide Taper Tools
Usage: Soft Wood, Hard Wood, Soft Plastic, Hard Plastic, Aluminum
(SW) = Soft Wood
(HW) = Hard Wood
(SP) = Soft Plastics
(HP) = Hard Plastics
(A) = Aluminum
(CW) = Composite Wood